Project to Sketch command bar
- Project Options
-
Displays the Project to Sketch Options dialog box so you can set the project options you want to use.
- Select
-
Enables the Select Step of the command for you to select the elements to include.
- Offset
-
Enables the Offset Step of the command for you to specify that you want to offset the projected geometry from the parent geometry.
This option is available if you selected the Project with offset option in the Project to Sketch Options dialog box.
- Selection Type
-
Specifies the type of elements you want to select for the project operation. You can use a combination of methods to select any number of elements. This option acts as a filter so you can select what you want to project more efficiently.
-
Single Wireframe—You can select a wireframe element, such as a sketch element or curve. You can also select an edge on a solid model or construction body with this option.
-
Wireframe Chain—You can select a connected set of wireframe elements from a sketch by selecting one of the elements in the chain.
-
Tangent Wireframe—You can select a connected set of tangent wireframe elements from a sketch, construction body, or solid model by selecting one of the elements in the chain.
-
Single Face—You can select a face on a solid model or construction body.
-
Tangent Face Chain—You can select a connected set of tangent faces on a solid model or construction body by selecting one of the elements in the chain.
-
Loop—You can select all the edges that enclose a face by selecting one of the edges of the face. You can select faces on solid models and construction bodies
-
- Deselect (x)
-
Clears the selection.
- Accept (check mark)
-
Accepts the selection.
- Distance
-
Specifies the offset distance. This option is only available when the Include with offset option on the Project to Sketch Options dialog box is active.
© 2021 UDS