Surface Visualization Settings dialog box

Turns the visualization display on or off.

Clears all selections for surface visualization.

Mesh density

Direction 1 check box

Controls the display of the surface mesh lines along direction 1.

Mesh density Direction 1 slider bar controls the density of surface mesh. Sparse to Dense (Sparse =1 and Dense =20).

Surface mesh Direction 1 Color controls the color of mesh in direction 1.

Direction 2 check box

Controls the display of the surface mesh lines along direction 2.

Mesh density Direction 2 slider bar controls the density of surface mesh. Sparse to Dense (Sparse =1 and Dense =20).

Surface mesh Direction 2 Color controls the color of mesh in direction 2.

Comb color

Direction 1 check box

Controls the display curvature comb along direction 1.

Curvature comb Direction 1 Color 1 controls the first color of curvature in direction 1 (Color below curve). Curvature comb Direction 1 Color 2 control the second color of curvature in direction 1 (Color above curve).

The Density and Magnitude of the curvature combs are controlled by the slider bar

The Density range values are Sparse=5 and Dense 100. The Magnitude range values are Small=0 and Large=10.

The following illustration shows the curvature combs colors. The item labeled as 1 is the Direction 1 Color 1 (Color below curve). The item labeled as 2 is Direction 1 Color 2 (Color above curve). The item labeled as 3 is the Comb curve color.

Direction 2 check box

Controls the display curvature comb along direction 2.

Curvature comb Direction 2 Color 1 controls the first color of curvature in direction 2 (Color below curve). Curvature comb Direction 2 Color 2 control the second color of curvature in direction 2 (Color above curve).

The Density and Magnitude of the curvature combs are controlled by the slider bar.

The Density range values are Sparse=5 and Dense 100. The Magnitude range values are Small=0 and Large=10.

Comb curve

Controls the color of curvature comb curve.

Closes the dialog box.

Resets all controls to default values.

Accesses the help command for surface visualization.