Thread command bar (ordered)
- Thread Options
-
Displays the Thread Options dialog box (ordered) so you can specify a standard, straight pipe, or a tapered pipe thread type.
- Physical Thread
-
Creates physical threads on a threaded cylindrical feature. When deselected, cosmetic threads display.
Note:This option is enabled by default. There is a possible performance impact when creating thread geometry. The system administrator can disable the Physical Thread option on the SE Admin utility.
Note:Physical Thread is only available for Standard Thread and not available for Straight Pipe Thread and Tapered Pipe Thread.
- Select Cylinder Step
-
Selects a cylinder for the thread reference.
- Cylinder End Step
-
Selects the end of the cylinder from which the threads will be offset.
- Parameters Step
-
- Finish
-
Accepts the thread definition and creates the thread feature.
- Offset From End
-
Specifies the distance the threads will be offset from the end of the cylinder.
- Depth Method
-
- To Cylinder Extent
-
Extends the threads the entire length of the cylinder.
- Finite Value
-
Extends the threads a finite distance from an end of the cylinder.
- Thread Depth
-
Specifies the depth of the threads along the cylinder.
- Thread Type
-
Specifies the thread size from the threads listed in the hole database.
© 2021 UDS