Part to Sheet Metal Options dialog box

Bend Radius

Specifies the bend radius value for the feature you are constructing.

Use Default Value: Uses the default value specified on the Options dialog box.

Gap

Specifies a gap between both faces when you use the Close option to close selected corners or the Overlap option to overlap selected corners. The gap distance cannot be negative and cannot be larger than the material thickness.

Closed Corner

Closes the selected corners.

Overlapping Corners

Overlaps the selected corners.

Flip

Reverses the overlapping of the flanges. This option is only available for overlapping corners.

Overlap Ratio

Specifies the percentage for computing the overlap distance. The value you type computes the overlap distance as a percentage of the global material thickness.

Note:

The Overlap option creates an entry in the Variable Table that you can edit.

Treatment

Specifies the treatment you want to apply to the bent faces of the flanges. You can apply no treatment,

Treatment type	Example
No treatment
open treatment,
closed treatment
circular cutout treatment
u-shaped treatment Note: This treatment option is only available when overriding the corner parameter.
v-shaped treatment Note: This treatment option is only available when overriding the corner parameter.
square treatment Note: This treatment option is only available when overriding the corner parameter.
miter treatment Note: This treatment option is only available when overriding the corner parameter.

Diameter