Jog command bar

Bend Options

Displays the Bend Options dialog box so you can set the bend construction options.

Material Side

Positions the bend with respect to the material side.

Material Inside

Positions the portion of the feature that is perpendicular to the profile plane such that it is inside of the profile plane.

Material Outside

Positions the portion of the feature that is perpendicular to the profile plane such that it is outside of the profile plane.

Bend Outside

Positions both the portion of the feature that is perpendicular to the profile plane and the bend such that they are outside of the profile plane.

Measurement Point

Measures from the selected face to the inside or outside of the new feature.

Measurement Inside

Measures from the selected face to the near side of the feature.

Measurement Outside

Measures from the selected face to the far side of the feature.

Keypoints

Sets the type of keypoint you can select to define a feature extent or to position a new reference plane. You can then define the feature extent or the location of the reference plane using a keypoint on other existing geometry. The available keypoint options are specific to the command and workflow you use.

	Selects the center and end points.
	Selects any keypoint.
	Selects an end point.
	Selects the center point of a circle or arc.
	Selects a midpoint.
	Selects a tangency point on an analytic curved face such as a cylinder, sphere, torus, or cone.
	Selects a silhouette point.
	Selects an edit point on a curve.
	Turns off the keypoint location.

Jog command bar

Add a jog to a tab