Normal Cutout command bar (Part environment)
- Main Steps:
- Select Curve Step
-
Allows you select a closed curve or a sketch that resides on a part face.
- Side Step
-
Defines the side of the profile where material will be removed and the depth of the feature.
- Finish/Cancel
-
This button changes functions as you move through the feature construction process. The Finish button constructs the feature using input provided in the other steps. Once you construct the feature, you can edit it by re-selecting the appropriate step on the command bar. The Cancel button discards any input and exits the command.
- Select Curve Step Options:
- Faces Touching Curves
-
Specifies that only the faces intersecting the curves be modified.
- All Faces
-
Specifies that all the faces inside the curve be cut.
- Select
-
Sets the method of selecting the curve.
-
Single—Allows you to select one or more individual elements.
-
Chain—Allows you to select a endpoint connected set of elements by selecting one of the elements in the chain.
-
- Deselect (x)
-
Clears the selection.
- Accept (check mark)
-
Accepts the selection.
- Side Step Options:
- Depth
-
Defines the thickness value of the material to be removed.
- Other command bar Options:
- Name
-
Displays the feature name. Feature names are assigned automatically. You can edit the name by typing a new name in the box on the command bar, or by selecting the feature and using the Rename command on the shortcut menu.
© 2021 UDS